CKSQR - SANFORD RUBBER CEMENT

  • MSDS: CKSQR
  • Manufacturer: SANFORD CORP
  • Product Name: SANFORD RUBBER CEMENT
  • National Stock Number: -
Product Identification

Product ID:SANFORD RUBBER CEMENT
MSDS Date:04/24/1992
FSC:NIIN:Submitter:D DG
MSDS Number: CKSQR

Responsible Party
SANFORD CORP
2740 WASHINGTON BLVD
BELLWOOD, IL 60104
US

Emergency Phone: 1-800-228-5635

Info Phone: 1-800-323-0749

Cage: 86874

Contractor
SANFORD CORPORATION
BELLWOOD, IL 60104 US

Telephone: 1-800-323-0749

Cage: 86874

Ingredients

NATURAL OR SYNTHETIC RUBBER


HEPTANE

CAS: 142-82-5

RTECS: MI7700000

OSHA PEL 2000 MG/M3;500 PPM

ACGIH TLV: 1640 MG/M3;400 PPM


ETHYL ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1900 MG/M3;1000 PPM

ACGIH TLV: 1880 MG/M3;1000 PPM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NON-TOXIC
Effects of Overexposure:EYE/SKIN: IRRITATION.

First Aid

First Aid:EYE: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
INGESTION: CONTACT A PHYSICIAN.

Fire Fighting

Flash Point:=-3.7C, 25.F
Lower Limits:1.2
Upper Limits:7.5

Accidental Release

Spill Release Procedures:WIPE UP WITH AN ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:KEEP CAP ON CONTAINER WHEN NOT IN USE.
USE ONLY IN WELL VENTILATED AREA. AVOID SKIN CONTACT WITH LIQUID.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NONE UNDER NORMAL WORKING CONDITIONS.
Work Hygienic Practices:CLEAN, SAFE WORK ENVIRONMENT
Supplemental Safety and Health
VENDOR #: 17870. JL HAMMETT P/N: 21923

Chemical Properties

HCC:F2
Boiling Pt:=93.3C, 200.F
Vapor Pres:76 MMHG @ 68F
Vapor Density:>AIR
Spec Gravity:LESS THAN 1.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER VISCOUS LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID SPARKS AND FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROCARBONS AND ACRID PRODUCTS OF COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISCARD AS SOLID WASTE.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport

Transport Information:NONE SPECIFIED BY RESPONSIBLE PARTY.

Regulatory

SARA Title III Information:NONE SPECIFIED BY RESPONSIBLE PARTY.
Federal Regulatory Information:NONE SPECIFIED BY RESPONSIBLE PARTY.
State Regulatory Information:NONE SPECIFIED BY RESPONSIBLE PARTY.